super capacitors vol.03 fc series features ?enables surface mounting. ?high rated voltage of 5.5v. ?high reliability solution leakage. dimensions applications ?subsidiary power supply. buck up power supply line. memory backup during battery exchange. precautions for use ? this capacitor is exclusive use of reflow soldering. it's designed for thermal conduction system such as infrared ray (ir) or heat blow. for applying other methods, please consult with us first. ? graph attheleft,"reflow condition" indicares the surface temperature at the top of capacitor. b 0.2 d 0.5 a 0.2 k i l h max. pi w 0.1 anode polarity negative polarity markings max. rated voltage date code nominal capacitance 473 5.5v l5 negative polarity max. rated voltage date code nominal capacitance fc 5.5v 474 l5-001 fc series negative polarity n t fc0h473ztbr24 fc0h104ztbr24 fc0h224ztbr24 fc0v104ztbr24 fc0v224ztbr24 fc0v474ztbr24 fc0h474ztbr32 FC0H105ZTBR44 standard rating fc0h473ztbr24 5.5 0.047 50 0.071 4.2 10.5 5.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 fc0h104ztbr24 5.5 0.10 25 0.15 4.2 10.5 5.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 fc0h224ztbr24 5.5 0.22 25 0.33 4.2 10.5 8.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 fc0h474ztbr32 5.5 0.47 13 0.71 4.2 16.0 9.5 16.3 16.3 6.8 1.0 1.2 5.0 1.2 0.35 0 FC0H105ZTBR44 5.5 1.00 7 1.50 4.2 21.0 10.5 21.6 21.6 7.0 1.0 1.4 10.0 1.2 0.35 0 fc0v104ztbr24 3.5 0.10 50 0.090 10.5 5.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 fc0v224ztbr24 3.5 0.22 25 0.20 10.5 5.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 fc0v474ztbr24 3.5 0.47 25 0.42 10.5 8.5 10.8 10.8 3.6 0.5 1.2 5.0 0.7 0.2 0 nominal capacitance discharge system (f) part number max. rated voltage (vdc) max. esr (at 1khz) ( ? ) max. current at 30 minutes (ma) voltage holding characteristic min. (v) dh a b i w p k l dimension (unit:mm) ? reflow condition +0.3 -0.1 +0.3 -0.1 +0.3 -0.1 +0.3 -0.1 +0.3 -0.1 +0.3 -0.1 +0.5 -0.1 +0.5 -0.1 250 200 150 100 50 0 120 sec 160 c tp:time at more than 200 c reflow profile surface temperature ( c) (top part of capacitor) peak temperature time (sec) 250 240 230 220 210 200 tp (sec) 0 10 20 30 40 50 60 peak temperature matrix peak temperature:235 c less than 10 sec. peak temperature( c)
super capacitors vol.03 t ape and reel dimensions [reel dimensions] dimensions of indented [square-hole plastic tape] t 1 t 2 sprocket hole d 0 indented square-hole for fitting super capacitors super capacitors fitting on square-hole a p 1 p 2 p 0 forward direction fe w b + + + b w a c e d r:10 t number of pachaged super capacitors mark tbr24 tbr32 tbr44 (mm) a b c d e w t 380 2 13 0.5 21 0.8 2 0.5 25.5 0.5 330 2 100 1 13 0.5 21 0.8 2 0.5 32.5 0.5 2.8 380 2 100 1 13 0.5 21 0.8 2 0.5 44.5 0.5 2.8 80 1 100 1 product height 5.5mm product height 8.5mm 3.0 2.8 product height 5.5mm product height 8.5mm mark tbr24 tbr32 tbr44 (mm) w a b p 0 p 1 p 2 f d 0 t 1 e t 2 24.0 11.4 13.0 4.0 16.0 2.0 11.5 1.55 0.4 1.75 5.8 32.0 18.0 20.0 4.0 24.0 2.0 14.2 1.55 0.5 1.75 10.0 44.0 23.0 25.0 4.0 32.0 2.0 20.2 1.55 0.5 1.75 12.0 part number packaging 1000pcs./reel 1000pcs./reel 500pcs./reel 200pcs./reel 150pcs./reel 1000pcs./reel 1000pcs./reel 500pcs./reel fc0h473ztbr24 fc0h104ztbr24 fc0h224ztbr24 fc0h474ztbr32 FC0H105ZTBR44 fc0v104ztbr24 fc0v224ztbr24 fc0v474ztbr24
super capacitors vol.03 standard ?5 c to +70?c 5.5 vdc 0.047 to 1.0f +80%, ?0% see standard list see standard list capacitance more than 90% of initial requirement equivalent series resistance not to exceed 120% of initial requirement current (30-minute value) not to exceed 120% of initial requirement appearance no obvious abnormality capacitance 50% or higher of initial value equivalent series resistance 4 or less times initial value capacitance 200% or below of initial value equivalent series resistance satisty initial standard value current (30-minute value) 1.5 cv (ma) or below capacitance within 20% of initial value equivalent series resistance satisty initial standard value current (30-minute value) satisty initial standard value capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious abnormality capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious able abnormality capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious abnormality capacitance within 20% of initial value equivalent series resistance 1.2 or less times initial standard value current (30-minute value) 1.2 or less times initial standard value appearance no obuious abnormality capacitance within 30% of initial value equivalent series resistance t wice or less times initial standard value current (30-minute value) t wice or less times initial standard value appearance no obvious abnormality v oltage between terminal leads higher than 4.2 v item operating temperature range maximum operating voltage nominal capacitance range capacitance allowance equivalent series resistance current (30-minutes value) surge voltage20 phase 2 phase 5 phase 6 v ibration resistance soldering heat resistance t emperature cycle humidity resistance high temperature load voltage holding characteristics (self dischage ) t est conditions conforming to jis c 5102 -1994 see characteristics measuring method. see characteristics measuring method. see characteristics measuring method. see characteristics measuring method. conforms to 7.14 surge voltage: 6.3 v (5.5v products) t emperature: 70 2?c charge: 30 sec. discharge: 9 min. 30 sec. number of cycles 1000 cycles. charge resistance: 0.047f 300 ? discharge resistance: 0 ? conforms to 7.12 phase 1: +25 2 c phase 2: ?5 2 c phase 3: ?0 2 c phase 4: +25 2 c phase 5: +70 2 c phase 6: +25 2 c conforms to 8.2.3 frequency : 10 to 55 hz t est duration : 6 hours conforms to 8.5 solder temperature: 260 10 c dipping duration: 10 1 sec. dipped up to 1.6 mm from the lower end of the capacitor. conforms to 9.3 t emperature condition: ?5 c normal temperature +70 c normal temperature number of cycles: 5 cycles conforms to 9.5 t emperature: 40 2 c relative humidity: 90 to 95% rh t est duration: 240 8 hours conforms to 9.10 t emperature: 70 2 c v oltage applied: 5.5 vdc series protection resistance: 0 ? t est duration: 1000 hours specifications 5.5v t ype +48 0 t emperature v ariation of characteristics v oltage applied: 5.0 vdc series resistance: 0 ? charging time: 24hours t ime: 24hours te mperature: lower than 25 c charging condition storage * * the characteristics above must be satisfied for asterisked items after the end of reflow soldering (according to the reflow condition shown on page ). * * * * * * *
super capacitors vol.03 standard ?5 c to +70?c 3.5 vdc 0.010 to 0.47f +80%, ?0% see standard list see standard list capacitance more than 90% of initial requirement equivalent series resistance not to exceed 120% of initial requirement current (30-minute value) not to exceed 120% of initial requirement appearance no obvious abnormality capacitance 50% or higher of initial value equivalent series resistance 4 or less times initial value capacitance 200% or below of initial value equivalent series resistance satisty initial standard value current (30-minute value) 1.5 cv (ma) or below capacitance within 20% of initial value equivalent series resistance satisty initial standard value current (30-minute value) satisty initial standard value capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious abnormality capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious able abnormality capacitance equivalent series resistance satisty initial standard value current (30-minute value) appearance no obvious abnormality capacitance within 20% of initial value equivalent series resistance 1.2 or less times initial standard value current (30-minute value) 1.2 or less times initial standard value appearance no obuious abnormality capacitance within 30% of initial value equivalent series resistance t wice or less times initial standard value current (30-minute value) t wice or less times initial standard value appearance no obvious abnormality item operating temperature range maximum operating voltage nominal capacitance range capacitance allowance equivalent series resistance current (30-minutes value) surge voltage phase 2 phase 5 phase 6 v ibration resistance soldering heat resistance t emperature cycle humidity resistance high temperature load t est conditions conforming to jis c 5012 -1994 see characteristics measuring method. see characteristics measuring method. see characteristics measuring method. see characteristics measuring method. conforms to 7.12 phase 1: +25 2 c phase 2: ?5 2 c phase 3: ?0 2 c phase 4: +25 2 c phase 5: +70 2 c phase 6: +25 2 c conforms to 8.2.3 frequency : 10 to 55 hz t est duration : 6 hours conforms to 8.5 solder temperature: 260 10 c dipping duration: 10 1 sec. dipped up to 1.6 mm from the lower end of the capacitor. conforms to 9.3 t emperature condition: ?5 c normal temperature +70 c normal temperature number of cycles: 5 cycles conforms to 9.5 t emperature: 40 2 c relative humidity: 90 to 95% rh t est duration: 240 8 hours conforms to 9.10 t emperature: 70 2 c v oltage applied: 3.5 vdc series protection resistance: 0 ? t est duration: 1000 hours specifications 3.5v t ype +48 0 t emperature v ariation of characteristics * * * * * * * * the characteristics above must be satisfied for asterisked items after the end of reflow soldering (according to the reflow condition shown on page ). conforms to 7.14 surge voltage: 4.0 v (3.5v products) t emperature: 70 2?c charge: 30 sec. discharge: 9 min. 30 sec. number of cycles 1000 cycles. charge resistance : 0.10f 150 ? : 0.22f 56 ? : 0.47f 30 ? : 1.0f 15 ? discharge resistance: 0 ?
|
